Is your property suffering from leaks, wind, or rain? There's an easy solution - UTARPit! Our simple and effective roof leak covers provide proven coverage and protection. UTARPit is nail-free, easy to install, and widely available online at Home Depot, Lowe's Home Improvement and Amazon.
These self-adhesive roof tarps are perfect for just about any type of roofing material, and delivers exceptional protection from even hurricane-force wind and rain for three to six months depending on the severity of weather conditions.UTARPit is a self-adhesive water mitigation roof tarp which has been tested to sustain hurricane winds of 110 mph and 8.8 inches per hour of wind-driven rain without releasing from your roof.
UTARPit is an innovative self-adhesive water mitigation tarp with a peel-away strip that eliminates the need for hammers, nails, wood strips, bricks and sandbags! No need to further damage your property while waiting for the roofer. UTARPit adheres to many roof types including clay tile, concrete, asphalt shingle, slate, fiberglass, and metal.
These self-adhesive roof tarps are perfect for just about any type of roofing material, and delivers exceptional protection from even hurricane-force wind and rain for three to six months depending on the severity of weather conditions.UTARPit is a self-adhesive water mitigation roof tarp which has been tested to sustain hurricane winds of 110 mph and 8.8 inches per hour of wind-driven rain without releasing from your roof.
UTARPit is an innovative self-adhesive water mitigation tarp with a peel-away strip that eliminates the need for hammers, nails, wood strips, bricks and sandbags! No need to further damage your property while waiting for the roofer. UTARPit adheres to many roof types including clay tile, concrete, asphalt shingle, slate, fiberglass, and metal.
Services
In order for the tarp to work effectively it must be properly installed. Make sure the surface area where you wish to apply it does not have any debris. The tarp works best if the area is dry. If the area is wet, go over the designated area with a heat gun or torch for a minute or two in order for the adhesive to adhere.
Make sure the surface area where you wish to apply it does not have any debris. The tarp works best if the area is dry. If the area is wet, go over the designated area with a heat gun or torch for a minute or two in order for the adhesive to adhere. If there is snow, around 32 degrees, make sure you clean out the snow as much as possible and torch the perimeter where the adhesive is going to be placed.
Reviews
Be the first to review Utarpit.
Write a Review
